Printer Friendly
Email a Friend
-
Go green and stay out of the red
27 Aug 2008
Environmental measures could be the answer to combating the downturn with new research launched today showing that waste prevention, using less raw material and energy recovery will be crucial to saving UK companies money in the face of economic recession.
-
Bourne injects more capacity
27 Aug 2008
Walsall-based Bourne Technical Mouldings, BTM, has boosted capacity by investing in a new energy-efficient injection moulding machine. The Vr-250ES from Victor Europe uses a servo-motor system that can achieve power savings of up to 70%.
-
5-axis machining doubles productivity
27 Aug 2008
Aerospace subcontractor, Atlantic Precision Engineering, is unusual in that it offers both metallic and non-metallic machined components. Over the past year it has invested £750,000 in expanding its floor area by 40 percent, Jobshop production control software and a Matsuura 5-axis machining centre.
-
They can’t believe it’s got better
27 Aug 2008
Some UK businesses are turning their backs on lean management systems because they fear that the improvements such systems can produce are too good to be true, according to a lean management expert.
-
Ultra-precision machining facility launches on 10 September
27 Aug 2008
A new Ultra Precision Microscopy and Machining Centre will be launched at the University of Nottingham on 10 September. The Centre will allow companies to test the commercial potential of new micro products using the latest technologies in micro-moulding, laser processing, micro-machining, metrology and microscopy.
-
Engineering should train staff to solve skills shortages
21 Aug 2008
Seventeen percent of engineering firms are suffering from skills gaps and can't fill a third of their vacancies. Yet last year only eight percent of the engineering workforce gained nationally-recognised qualifacations. Time to act, says the Learning and Skills Council (LSC).
-
Business development appointment at Kenard
20 Aug 2008
The Kenard Engineering Group has appointed Dave Varney as business development manager. He has over 30 years experience in the manufacturing sector, including all aspects of precision machining in the defence and rail sectors.
-
It’s Texas tea-time as MNB strikes oil
20 Aug 2008
Following increased demand from oil and gas customers, MNB Precision of Coventry has ordered two new machine tools – a Soraluce travelling table CNC milling centre and a Hartford vertical machining centre – both from Ward CNC.
-
Beck to market low corrosion alloy
17 Aug 2008
Delphi Corp has announced a strategic licensing agreement with Beck Aluminum to produce and market its patented corrosion-resistant K-Alloy. The agreement will increase the availability of the alloy at attractive prices.
-
Crane care is a joy for Morris
13 Aug 2008
Morris Material Handling is providing a comprehensive, fixed-price maintenance service for Joy Mining Machinery in Worcester. The contract covers 50 overhead travelling cranes and some 120 jib hoists.
-
Forgemasters rolls out Asian contracts
13 Aug 2008
Sheffield Forgemasters International Ltd (SFIL) is producing its largest plate-mill rolls for the Asian steel market in two deals worth more than £4.5m. The first four 170 tonne back-up rolls, produced for Siemens VAI, will be shipped to Chinese steel company Wuhan Iron and Steel Group Corporation in a deal worth almost £2.5m.
-
Whitwam invests to inspect
13 Aug 2008
Aluminium alloy routing specialists, Whitwam Precision Components, has installed an optical, non-contact measuring machine that allows it to inspect flat aerospace components much more quickly that an traditional laser system and reverse engineer parts for which no electronic data exists.
-
Waterjet profiler piles on the pressure in Cornwall
13 Aug 2008
An 87k psi waterjet profiler has been installed at LaserMaster in Redruth, Cornwall. Believed to be among the most powerful systems in Europe it will cut almost any material, including steel and granite, up to half a metre thick.
-
CNES cements its reputation at Lafarge
12 Aug 2008
Corus Northern Engineering Services (CNES) has manufactured and installed a kiln support roller assembly on the 58m long rotary kiln at the heart of Lafarge Cement’s Cauldon Works in Staffordshire.
-
Prima laser keeps Young and Woods flexible
06 Aug 2008
Harlow-based Young & Woods has purchased a Prima Synchrono laser cutting machine to help it keep down costs and offer a flexible and competitive service to a diverse range of customers. “Versatility is a key requirement for us in providing solutions for customers,” explains director John O’Rourke.
-
Relocation, relocation, relocation
06 Aug 2008
On-site machining specialist, M&A Engineering is to move into purpose-designed office and factory in Milford Haven. Due for completion in early 2009, the complex will house the company's in-house production, training centre, offices and stores with adequate room for future expansion.
-
Alcoa forging lightweight alloy wheels for Reventón supercar
06 Aug 2008
Alcoa has been selected by Automobili Lamborghini to supply forged alloy wheels for its one million Euro Reventón car. With a limited production run, Lamborghini required the flexibility of Alcoa's manufacturing expertise to develop a lightweight wheel to complement the unique appearance and performance of the Reventón.
-
Machined shafts added to Blue Diamond range
06 Aug 2008
Blue Diamond can now supply high precision-machined shafts for critical applications in a wide range rotating machinery and equipment such as pumps, conveyors and mixers. Components are available in low or high volumes and a wide variety of materials. The shafts can include features such as oilways, keyways, threads, and splines.
-
Engineering expands despite gloomy economy
06 Aug 2008
Businesses in the engineering and technology sector are continuing to expand and recruit new staff despite the gloomy state of the economy, according to research by the Institution of Engineering and Technology (IET). The IET’s annual skills survey of 400 companies across the engineering and technology sector reveals that nearly two thirds cited business expansion as a reason for recruitment.
-
Bigger, hotter and higher pressure composites facility
06 Aug 2008
A 5m by 2m 350ºC high pressure autoclave will allow motorsport and aerospace companies to develop advanced, complex and high quality prototype and production composite components. The autoclave is the centrepiece of a new facilitynew centre, which has been opened by motorsport engineering specialist BERU f1systems.
-
SSC laser investment tops £2million
01 Aug 2008
SSC Laser has ordered its sixth Bystronic laser – a £350,000 Byspeed system with 4.4 kW resonator – bringing its overall investment since 2000 to more than £2million.
-
Full-time quality manager for Bourne
01 Aug 2008
Walsall-based Bourne Technical Mouldings is strengthening its growing team with the appointment of Russell Wood to the newly established full time role of quality manager.
-
Remploy wins electronics manufacturing award
30 Jul 2008
Remploy Electronics has been recognised in the Yorkshire Productivity Awards 2008, winning the National Vocational Qualification (NVQ) category. Remploy’s Bolton manufacturing site was nominated based on the number of its staff achieving level 2 NVQs in Electronics and won the category against competition from 20 other finalists from across the north of England.
-
Arthur Sanders – a new name in contract honing
30 Jul 2008
A joint venture between Delapena Honing Equipment’s contracting division and Apperley Honing has created a new contract honing business – Arthur Sanders (Cheltenham) Ltd. The venture will benefit from experience gained in Delapena’s 80 years as a leading manufacturer of honing equipment and Apperley’s 45 years as a contract honing specialist.
-
Low cost diecastings from Rencol
29 Jul 2008
A low cost diecasting service has been introduced by Rencol, providing manufacturers with a cost effective alternative to machining. Volumes can range from prototypes to mass production in aluminium, zinc and special alloys – with other materials on request.
Get Email News
Send Your News
